[Exposure Mode] In automatic mode exposure time range is between 0.1~80ms, in
manual mode exposure time can be set to 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/1000ms, default is automatic mode.
[Day/Night Mode] Automatic mode will set color mode on daytime and black &
white mode at night, color mode display color image only, black & white mode display
black & white image only.
[BLC] Close or open Back Light Compensation
[Auto Iris] Close or open automatic electronic Iris.
[Profile] Select indoor, outdoor or automatic mode, default is automatic mode.
[AE Reference] Set automatic exposure coefficient between 0~100, default is 50.
[DNC] Set Day/Night Convert Threshold between 10~50, default is 30.
[DWDR] Open or close Digital Wide Dynamic Range, the range is between 0~100.
[AE Sensitivity] Set automatic exposure sensitivity between 1~10, default is 5.
[AGC] Open or close AGC, the range is between 0~100.
[Slow Shutter] Select None/Low/Medium/High slow shutter, higher slow shutter
produce better night vision.
[IR_CUT Mode] Select “IR Synchronous Switch” or “Automatically Switch”, on “IR
Synchronous Switch” mode the IR CUT filter will synchronous with IR LED light.
[DayNTLevel] Select Day Noise Reduction Level between 0~5, 0 disable noise
reduction, 1 reduce less noise, 5 reduce more noise.
[NightNTLevel] Select Night Noise Reduction Level between 0~5, 0 disable noise
reduction, 1 reduce less noise, 5 reduce more noise.
www.avacomtech.com
Avacomtech Inc. Page 25
[Mirror/Flip] Enable the check box to turn the image up-side-down for H602x
camera.
[Anti Flicker] Enable the check box to avoid image flickering under a periodic light
source.
[IRSwap] Enable the check box to reverse IR Filter status.
_________________ 上一次由三叔于2046-12-26 9:18am修改,总共修改了11次
|
|
|