結果類似
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (ro)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw)
none on /tmp type tmpfs (rw)
/tmp/.cemnt/sda1 on /tmp/.cemnt/mnt_sda1 type ext2 (rw,nosuid,nodev,noexec,noatime)
/tmp/.cemnt/sda2 on /tmp/.cemnt/mnt_sda2 type ext3 (rw,nosuid,nodev,noexec,noatime,data=ordered)
其中 /tmp/.cemnt/sda1 就是U盤第一個分區被映射的路徑,進入該目錄,創建名為nand的備份目錄
* Type p. This will list any partitions on your disk drive.
* Type d 1, d 2, and so on to delete all partitions.
* Type p to list partitions. there should be no partitions left.
* Now type n, then p for primary, 1 for the first partition on the drive, and then press ENTER, accepting default values.
* Exit by typing w
p用於列出已有分區,按d 1可以刪掉第一個分區,按 d 2可以刪掉第二個分區,你需要刪掉所有分區,按n可以創建分區,接下來按p用於創建主分區,按1用於創建第一個分區,你可以回車接收缺省值,就是把整個U盤空間分給第一個區。最後按w退出。
此後將分區格式化成ext3文件系統
代碼:
wget http://archlinuxarm.org/os/pogoplug/mke2fs
chmod 755 mke2fs
./mke2fs /dev/sda1
mkdir usb
mount /dev/sda1 usb
下面我們將 Arch Linux 系統安裝到 U盤中,這個過程將持續一二十分鍾,你可以邊喝茶邊進行
代碼:
cd usb
wget http://archlinuxarm.org/os/ArchLinuxARM-armv5te-latest.tar.gz
tar -xzvf ArchLinuxARM-armv5te-*.tar.gz # This will take a long time
rm ArchLinuxARM-armv5te-*.tar.gz
sync # Takes a while when using a flash drive
adding new group: ntp
You are required to change your password immediately (root enforced)
groupadd: PAM authentication failed
adding new user: ntp
useradd: group 'ntp' does not exist
error: command failed to execute correctly
# /etc/bash.bashrc
#
# This file is sourced by all *interactive* bash shells on startup,
# including some apparently interactive shells such as scp and rcp
# that can't tolerate any output. So make sure this doesn't display
# anything or bad things will happen !
# Test for an interactive shell. There is no need to set anything
# past this point for scp and rcp, and it's important to refrain from
# outputting anything in those cases.
if [[ $- != *i* ]] ; then
# Shell is non-interactive. Be done now!
return
fi
# Bash won't get SIGWINCH if another process is in the foreground.
# Enable checkwinsize so that bash will check the terminal size when
# it regains control. #65623
# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
shopt -s checkwinsize
# Enable history appending instead of overwriting. #139609
shopt -s histappend
# Change the window title of X terminals
case ${TERM} in
xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix)
PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/$HOME/~}\007"'
;;
screen)
PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/$HOME/~}\033\\"'
;;
esac
use_color=false
# Set colorful PS1 only on colorful terminals.
# dircolors --print-database uses its own built-in database
# instead of using /etc/DIR_COLORS. Try to use the external file
# first to take advantage of user additions. Use internal bash
# globbing instead of external grep binary.
safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM
match_lhs=""
[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
[[ -z ${match_lhs} ]] \
&& type -P dircolors >/dev/null \
&& match_lhs=$(dircolors --print-database)
[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
if ${use_color} ; then
# Enable colors for ls, etc. Prefer ~/.dir_colors #64489
if type -P dircolors >/dev/null ; then
if [[ -f ~/.dir_colors ]] ; then
eval $(dircolors -b ~/.dir_colors)
elif [[ -f /etc/DIR_COLORS ]] ; then
eval $(dircolors -b /etc/DIR_COLORS)
fi
fi
if [[ ${EUID} == 0 ]] ; then
PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] '
else
PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] '
fi
alias ls='ls --color=auto'
alias grep='grep --colour=auto'
else
if [[ ${EUID} == 0 ]] ; then
# show root@ when we don't have colors
PS1='\u@\h \W \$ '
else
PS1='\u@\h \w \$ '
fi
fi
論壇通告:
個人空間:
論壇轉跳:
贊 
花籃 
投訴
踩 
分享
x:yy:zz，請重啟dockstar，並重復以上步驟，記錄mac地址以備後用
